INTERNAL PROTOTYPE — NOT LEGAL ADVICE — DO NOT SEND

Portland City Code ch. 14

Citation
Portland City Code ch. 14
Parent Document
Portland City Code ch. 14
Jurisdiction
Portland (municipal)

Other Sections in This Document (541)

Full Text

1,842 chars
7 DIMENSIONAL STANDARDS                                    purpose, the level of the eaves shall be taken to
                                                           mean the highest level where the plane of the roof
7.1 APPLICABILITY                                          intersects the plane of the outside wall on a side
Construction, alterations, and additions to                containing the eaves.
structures and buildings are governed by this article,
except when superseded by other applicable laws or         Impervious surface ratio. The proportion of a site
ordinances. It is the intent that, when in doubt, this     covered by impervious surfaces, calculated by
article should be interpreted to accommodate the           dividing the total impervious surface area by the lot
goals of the City’s Comprehensive Plan and other           area. For the purposes of this measurement,
plans.                                                     impervious surface shall be as defined by the Maine
                                                           Department of Environmental Protection.
7.2 RULES OF MEASUREMENT
Building footprint. The lot area contained within          Landscaped open space ratio. The proportion of
the outermost perimeter of the building envelope           lot area covered by landscaped open space,
including cantilevered portions of the building,           calculated by dividing the total landscaped open
projections, and porches, decks, and similar               space area by the lot area. For the purposes of this
attached structures integral to the building and           measurement, landscaped open space shall not
contributing to its mass, but excluding roof               include rooftop gardens or structured or
overhangs.                                                 engineered surfaces.