Section 4(d) of the Act specifies that, for a new manufactured home community, plans must be
prepared and sealed by an architect licensed under the authority of the Illinois Architectural
Practice Act of 1989 or an engineer licensed under the authority of the Illinois Professional
Engineering Act. The plans shall be drawn to scale. Two copies of the plans shall be submitted
to the Department. The plans and application material shall contain, at a minimum, an overall
manufactured home community plan and a typical site plan as follows:
a) The overall manufactured home community plan shall include the following
details for all proposed construction:
1) The location and dimension of each proposed site;
DPH 77 ILLINOIS ADMINISTRATIVE CODE 860 860.120
2) The location, width, type of surface material and traffic flow of all streets;
3) The locations of all sidewalks and parking areas;
4) The existing and proposed contours of the area, including an indication of
any area in a flood plain and drainage away from the homes;
5) The locations, types, sizes and identification numbers of all water pipes;
details of any private or semi-private water sources, sufficient to indicate
compliance, and if the manufactured home community is served by a
community public water supply system, the name of the system;
6) The locations, types, sizes and identification numbers of all sewage pipes,
details of all private sewage disposal systems sufficient to indicate
compliance, and, if the manufactured home community is served by a
public sewer system, the name of the system;
7) The locations, types and sizes of all electrical conductors and equipment;
8) The types, sizes, heights and locations of all proposed manufactured home
community lighting;