Skip to main content
DRAFT FOR ATTORNEY REVIEW — NOT FINAL

Kansas City Stock Yards Co. v. A. Reich & Sons, 250 S.W.2d 692 (1952)

Citation
Kansas City Stock Yards Co. v. A. Reich & Sons, 250 S.W.2d 692 (1952)
Parent Document
Kansas City Stock Yards Co. v. A. Reich & Sons, 250 S.W.2d 692 (1952)
Jurisdiction
Missouri (state)
Effective Date
1952-07-14

Other Sections in This Document (53)

Full Text

796 chars
*696 Plaintiff's evidence further showed that on the evening the fire occurred, three employees of defendant were present in the repair shop and at the time of the fire, one of them was working on a truck with an electric arc welder. This truck had a bed of tin reinforced with steel and wood, 7 feet wide, 7 feet high and 14 feet long. Underneath and near each side of the bed were two steel sills running nearly the full length thereof and on the chassis of the truck were two steel members, the same length and the same distance apart as the two sills on the bed and these had been connected by welding steel angle irons about eight inches long along each side of the truck bed, connecting the sills and the chassis frame. There were approximately 7 of these pieces of angle iron on each side.